Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
- 3. General data
   - 3.1. Cars with petrol engines
      3.1.1. Masses and transfer numbers
      3.1.2. Operational liquids
      - 3.1.3. Changes in a car design from 1984 to 1986.
         3.1.3.1. Engine
         3.1.3.2. Head of the block of cylinders
         3.1.3.3. Block of cylinders of the engine
         3.1.3.4. Krivoshipno-shatunny mechanism
         3.1.3.5. Cranked shaft
         3.1.3.6. Gazoraspredeleniye system
         3.1.3.7. Engine mount
         3.1.3.8. Cooling system
         + 3.1.3.9. Carburetor
         3.1.3.10. System of injection of fuel
         3.1.3.11. Ignition system
         3.1.3.12. Coupling
         3.1.3.13. Mechanical four-speed transmission
         3.1.3.14. Mechanical five-speed transmission
         - 3.1.3.15. Automatic transmission of Ford A 4 LD
            3.1.3.15.1. Technical characteristics
            3.1.3.15.2. Service and repair
            3.1.3.15.3. Changes in a design of an automatic transmission
         3.1.3.16. Power shaft and back bridge
         3.1.3.17. Steering system with the hydraulic booster
         3.1.3.18. Forward suspension bracket
         3.1.3.19. Back suspension bracket
         3.1.3.20. Brake system
         + 3.1.3.21. Electric equipment
         3.1.3.22. General data
      + 3.1.4. Changes in a car design from 1987 to 1989.
      + 3.1.5. Changes in a car design with 1990 till February, 1993.
   + 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






3.1.3.15.3. Changes in a design of an automatic transmission

GENERAL INFORMATION

Since February, 1986 (a code of date of manufacturing of "GY") the method of fastening of the back holder of the engine is changed. The new limiter has a cap form. In a case when in the senior models as a result of sharp braking there was a moving of the lever of gear shifting, it is necessary to replace the moving limiter with the limiter of new type.