Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
- 3. General data
   - 3.1. Cars with petrol engines
      3.1.1. Masses and transfer numbers
      3.1.2. Operational liquids
      - 3.1.3. Changes in a car design from 1984 to 1986.
         3.1.3.1. Engine
         3.1.3.2. Head of the block of cylinders
         3.1.3.3. Block of cylinders of the engine
         3.1.3.4. Krivoshipno-shatunny mechanism
         3.1.3.5. Cranked shaft
         3.1.3.6. Gazoraspredeleniye system
         3.1.3.7. Engine mount
         3.1.3.8. Cooling system
         + 3.1.3.9. Carburetor
         3.1.3.10. System of injection of fuel
         3.1.3.11. Ignition system
         3.1.3.12. Coupling
         3.1.3.13. Mechanical four-speed transmission
         3.1.3.14. Mechanical five-speed transmission
         + 3.1.3.15. Automatic transmission of Ford A 4 LD
         3.1.3.16. Power shaft and back bridge
         3.1.3.17. Steering system with the hydraulic booster
         3.1.3.18. Forward suspension bracket
         3.1.3.19. Back suspension bracket
         3.1.3.20. Brake system
         + 3.1.3.21. Electric equipment
         3.1.3.22. General data
      + 3.1.4. Changes in a car design from 1987 to 1989.
      + 3.1.5. Changes in a car design with 1990 till February, 1993.
   + 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





3.1.3.14. Mechanical five-speed transmission

GENERAL INFORMATION

Installation of the new needle bearing of an intermediate shaft of a mechanical 5-step transmission

And – remote rings,

In – bearing needles

Bearings of an intermediate shaft

Since May, 1983 (a code of date of manufacturing of "DL") the new solution of placement of an intermediate shaft in bearings in all five-speed transmissions is entered. The length of needles of bearings is changed to 25,75 mm (before 33 mm).

At replacement of needle bearings in transmissions of earlier date of manufacturing it is possible to use new bearings, thus it is necessary to establish surely two additional (not being applied in the new decision) remote rings with factory designation 839 E-7125-AA-6094966.


Prevention

Two additional rings it is necessary to have the bearing.


Other information concerning a technical characteristics, adjustment and repair of a mechanical five-speed transmission, is provided in subsection 6.2.