Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
- 3. General data
   - 3.1. Cars with petrol engines
      3.1.1. Masses and transfer numbers
      3.1.2. Operational liquids
      - 3.1.3. Changes in a car design from 1984 to 1986.
         3.1.3.1. Engine
         3.1.3.2. Head of the block of cylinders
         3.1.3.3. Block of cylinders of the engine
         3.1.3.4. Krivoshipno-shatunny mechanism
         3.1.3.5. Cranked shaft
         3.1.3.6. Gazoraspredeleniye system
         3.1.3.7. Engine mount
         3.1.3.8. Cooling system
         + 3.1.3.9. Carburetor
         3.1.3.10. System of injection of fuel
         3.1.3.11. Ignition system
         3.1.3.12. Coupling
         3.1.3.13. Mechanical four-speed transmission
         3.1.3.14. Mechanical five-speed transmission
         + 3.1.3.15. Automatic transmission of Ford A 4 LD
         3.1.3.16. Power shaft and back bridge
         3.1.3.17. Steering system with the hydraulic booster
         3.1.3.18. Forward suspension bracket
         3.1.3.19. Back suspension bracket
         3.1.3.20. Brake system
         + 3.1.3.21. Electric equipment
         3.1.3.22. General data
      + 3.1.4. Changes in a car design from 1987 to 1989.
      + 3.1.5. Changes in a car design with 1990 till February, 1993.
   + 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






3.1.3.17. Steering system with the hydraulic booster

GENERAL INFORMATION

Since September, 1983 (a code of date of manufacturing of "GJ") in cars with engines 2,0 of dm3 equipped the amplifier of system of a steering applies new type of bolts of fastening of the auxiliary pump to the block of cylinders of the engine.

Moment of a tightening of bolts of new type: 58±6 Nanometer.

Other information concerning a technical characteristics, adjustment and repair of system of a steering with the amplifier, is provided in subsection 8.6.