Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
- 6. Transmissions
+ 6.1. Mechanical four-speed transmission
- 6.2. Mechanical five-speed transmission
6.2.1. Technical characteristics
6.2.2. Removal and transmission installation
6.2.3. Dismantling and transmission assembly
6.2.4. Dismantling and assembly of the block of gear wheels
+ 6.3. Automatic transmission of Ford C 3
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
|
Five-step mechanical transmission of type N
The transmission has three shaft, the classical design, four synchronized transfers forward and not synchronized transfer of a backing. The lever of gear shifting is on a floor.
Type: N.
Transfer numbers
|
Transfer
|
Transfer number of transfer
|
Full transfer number
|
|
At transfer number of the main transfer
|
|
3,38
|
3,62
|
3,92
|
|
1
|
3,65
|
12,34
|
13,27
|
14,31
|
|
2
|
1,97
|
6,66
|
7,13
|
7,72
|
|
3
|
1,37
|
4,63
|
4,96
|
5,37
|
|
4
|
1,00
|
3,38
|
3,62
|
3,92
|
|
5
|
0,82
|
2,77
|
2,97
|
3,21
|
|
Backing
|
3,66
|
12,37
|
13,25
|
14,35
|
Adjusting data
| Distance between a gear wheel of a drive of a speedometer and a lock ring of the synchronizer of the 5th transfer |
And = 123,5 ± 0,5 mm
|
| Thickness of lock rings of a nave of the synchronizer of transfers 3-4 on secondary to a shaft |
1,63; 1,74; 1,85 mm
|
| Thickness of lock rings of the bearing of a secondary shaft in an intermediate case, and also a lock ring of the synchronizer of the 5th transfer on secondary to a shaft |
1,75; 1,81; 1,87; 1,93; 1,99 mm
|
| Thickness of lock rings of the bearing of an intermediate shaft in an intermediate case |
1,88; 1,95; 2,12; 2,19; 2,26 mm
|
Greasing
| Amount of oil |
0,98 dm
|
| Type |
oil for a transmission of SAE 80 Ford SQM 2 C of 9008 A
|
Tightening moments
| Coupling case to the block of cylinders of the engine |
40-51 Nanometers
|
| Coupling case to a forward part of a case of a transmission |
70-90 Nanometers
|
| The driveshaft to a secondary shaft of a transmission |
57-67 Nanometers
|
| Metallo-rezinovy a connector to a cross-piece of a suspension bracket of a transmission |
16-20 Nanometers
|
| Metallo-rezinovy a connector to a transmission case |
50-57 Nanometers
|
| Cross-piece of a suspension bracket of a transmission to a body |
20-25 Nanometers
|
| Back part to a forward part of a case of a transmission |
45-49 Nanometers
|
| Cover to a forward part of a case of a transmission |
9–11 Nanometers
|
| The directing plug of the vyzhimny bearing of coupling |
9–11 Nanometers
|
| Nut of fastening of a gear wheel of the 5th transfer on intermediate to a shaft |
120-150 Nanometers
|
| Basic plate of a gear wheel of the 5th transfer |
21-26 Nanometers
|
| Switch of fires of a backing |
1–2 Nanometers
|
|
|