Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
- 3. General data
   - 3.1. Cars with petrol engines
      3.1.1. Masses and transfer numbers
      3.1.2. Operational liquids
      + 3.1.3. Changes in a car design from 1984 to 1986.
      - 3.1.4. Changes in a car design from 1987 to 1989.
         3.1.4.1. OHC engine
         - 3.1.4.2. Dm3 CVH 1,8 engine
            - 3.1.4.2.1. Technical characteristics
               3.1.4.2.1.1. Head of the block of cylinders of the engine
               3.1.4.2.1.2. Block of cylinders of the engine
               3.1.4.2.1.3. Krivoshipno-shatunny mechanism
               3.1.4.2.1.4. Gazoraspredeleniye system
               3.1.4.2.1.5. Greasing system
               3.1.4.2.1.6. Cooling system
               3.1.4.2.1.7. Fuel system
               3.1.4.2.1.8. Ignition system
               3.1.4.2.1.9. Tightening moments
            3.1.4.2.2. Engine adjustment
            3.1.4.2.3. Ignition system
            3.1.4.2.4. Gazoraspredeleniye system
            3.1.4.2.5. Assembly of the CVH 1,8 engine of dm3
         + 3.1.4.3. DOHC engine
         + 3.1.4.4. Service and repair
         + 3.1.4.5. Coupling
         3.1.4.6. Mechanical five-speed transmission of type N
         + 3.1.4.7. Mechanical five-speed transmission of MT 75 type
         3.1.4.8. Automatic transmission
         3.1.4.9. Forward suspension bracket
         + 3.1.4.10. Brake system
         + 3.1.4.11. Electric equipment
         3.1.4.12. General data
      + 3.1.5. Changes in a car design with 1990 till February, 1993.
   + 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





3.1.4.2.1.9. Tightening moments

GENERAL INFORMATION

Bolts of a head of the block of cylinders:
  – 1st stage
40-60 Nanometers
  – 2nd stage
to tighten on 180 °
  – 3rd stage
40-60 Nanometers
  – 4th stage
to tighten on 90 °
  – 5th stage
to tighten on 90 °
Cover of a head of the block of cylinders
8–10 Nanometers
Casing of system of a gazoraspredeleniye:
  – hairpins
9–10 Nanometers
  – bolts
6 Nanometers
  – nuts
8–10 Nanometers
Oil pallet:
  – bolts М6
8–11,5 Nanometers
  – bolts М8
20-30 Nanometers
Stopper oil plum in the oil pallet
20-30 Nanometers
Fastening of the oil pump to the block of cylinders
11-16 Nanometers
Cover of the oil pump
8–12,4 Nanometers
Bolts of covers of radical bearings
90-108 Nanometers
Bolts of covers of rods
26-34 Nanometers
Flywheel bolts
73-91 Nanometers
Damper of krutilny fluctuations of a cranked shaft
110-130 Nanometers
Cam-shaft pulley
95-115 Nanometers
Persistent plate of a cam-shaft
9–13 Nanometers
Tension device of a gear belt
23-30 Nanometers
The pump of cooling liquid
7–10 Nanometers
Final collector
21-26,5 Nanometers
Inlet collector
16-20 Nanometers
Carburetor support
20-24 Nanometers
The carburetor to a support
8–10 Nanometers
Thermostat case
8–11,5 Nanometers
Spark plugs
18-33 Nanometers
Sensor of situation and number of turns of the engine
4–7 Nanometers