Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
- 3. General data
   - 3.1. Cars with petrol engines
      3.1.1. Masses and transfer numbers
      3.1.2. Operational liquids
      + 3.1.3. Changes in a car design from 1984 to 1986.
      - 3.1.4. Changes in a car design from 1987 to 1989.
         3.1.4.1. OHC engine
         - 3.1.4.2. Dm3 CVH 1,8 engine
            - 3.1.4.2.1. Technical characteristics
               3.1.4.2.1.1. Head of the block of cylinders of the engine
               3.1.4.2.1.2. Block of cylinders of the engine
               3.1.4.2.1.3. Krivoshipno-shatunny mechanism
               3.1.4.2.1.4. Gazoraspredeleniye system
               3.1.4.2.1.5. Greasing system
               3.1.4.2.1.6. Cooling system
               3.1.4.2.1.7. Fuel system
               3.1.4.2.1.8. Ignition system
               3.1.4.2.1.9. Tightening moments
            3.1.4.2.2. Engine adjustment
            3.1.4.2.3. Ignition system
            3.1.4.2.4. Gazoraspredeleniye system
            3.1.4.2.5. Assembly of the CVH 1,8 engine of dm3
         + 3.1.4.3. DOHC engine
         + 3.1.4.4. Service and repair
         + 3.1.4.5. Coupling
         3.1.4.6. Mechanical five-speed transmission of type N
         + 3.1.4.7. Mechanical five-speed transmission of MT 75 type
         3.1.4.8. Automatic transmission
         3.1.4.9. Forward suspension bracket
         + 3.1.4.10. Brake system
         + 3.1.4.11. Electric equipment
         3.1.4.12. General data
      + 3.1.5. Changes in a car design with 1990 till February, 1993.
   + 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





3.1.4.2.1.5. Greasing system

GENERAL INFORMATION

Greasing under pressure is provided by the oil pump located on the forward end of a cranked shaft.

The gear oil pump contains perepuskny the valve regulating pressure.

The Polnoprotochny oil filter is located on the right side of the block of cylinders.

Oil pump
Pressure of oil (at temperature 80 ° C):
  – at 750 rpm
0,10 MPas
  – at 2000 rpm
0,28 MPas
Pressure of opening of the perepuskny valve
0,4 MPas
Pressure of fire of a control bulb of pressure of oil
lower than 30-50 kPas
Axial gap between gear wheels of the pump and a cover
0,014-0,100 mm
Gap of an external gear wheel in the pump case
0,06-0,19 mm
Oil filter
Brand and type
Motorcraft Super EFL 134
Periodicity of replacement
after 10 000 km of run of the car, then each 20 000 km or time in a year
Oil for the engine
Quantity (with the filter)
3,5 dm3
Type
all-weather oil for the engine according to API SG/CD viscosity of SAE 10W 30, 15W 50 or 20W 50
Periodicity of replacement
after 10 000 km of run of the car, then each 20 000 km or time in a year