Ford Sierra

1982-1993 of release

Repair and car operation


Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
- 3. General data
   + 3.1. Cars with petrol engines
   - 3.2. Cars with diesel engines
      - 3.2.1. Changes in a car design from 1988 to 1993.
         3.2.1.1. Dm3 engine 2,3
         - 3.2.1.2. Dm3 engine 1,8
            3.2.1.2.1. Technical characteristics
            3.2.1.2.2. Head of the block of cylinders
            3.2.1.2.3. Block of cylinders
            3.2.1.2.4. Krivoshipno-shatunny mechanism
            3.2.1.2.5. Gazoraspredeleniye system
            3.2.1.2.6. Greasing system
            3.2.1.2.7. Cooling system
            3.2.1.2.8. Fuel system
            3.2.1.2.9. Tightening moments
            3.2.1.2.10. Engine adjustment
         + 3.2.1.3. Fuel system
         + 3.2.1.4. The repair which is not demanding removal of the engine
         3.2.1.5. Removal and engine installation
         3.2.1.6. Engine dismantling
         3.2.1.7. Check of details
         3.2.1.8. Check of gaps of a cranked shaft and rods
         3.2.1.9. Engine assembly
         3.2.1.10. Greasing system
         3.2.1.11. Cooling system
         3.2.1.12. Coupling
         3.2.1.13. Mechanical five-speed transmission of MT 75 type
         3.2.1.14. Power shaft and back bridge
         3.2.1.15. Steering system
         3.2.1.16. Forward suspension bracket
         3.2.1.17. Brake system
         3.2.1.18. Electric equipment
         3.2.1.19. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


индивидуалки Новосибирска
Проверить ансомон на подлинность на сайте http://madbearshop.ru.
шумоизоляция стандарт


3.2.1.2.3. Block of cylinders

GENERAL INFORMATION

Block of cylinders of the engine

1–block of cylinders of the engine,
2–back cover,
3–sealing ring,
4–stopper plum of oil,
5–laying of the oil pallet,
6–oil pallet,

7–cap of a technological opening of the block of cylinders,
8–cap of the oil channel,
9–a stopper plum of cooling liquid from the block of cylinders,
10-a stopper closing an opening for installation of a cranked shaft in VMT

The pig-iron block of cylinders has cylinders and nests of bearings of the cranked shaft, executed directly in its material. Contains five nests of radical bearings of a cranked shaft. Between the next cylinders in the block of cylinders there are channels for passing of cooling liquid.

Designation of the block of cylinders: 89 FF of 6015 AB.

Diameters of cylinders:
  – the nominal:
     • group A
82,500-82,515 mm
     • group B
82,515-82,530 mm
     • group C
82,660-82,675 mm
     • group D
82,675-82,690 mm
  – the repair:
+ 0,5
83,000-83,015 mm
+ 1,0
83,500-83,515 mm
Diameter of openings of nests of loose leaves of radical bearings
53,683-53,696 mm