| 1. To disconnect from the accumulator a weight wire. |
| 2. To merge cooling system (see subsection 3.2.1.11). |
| 3. To disconnect the pipeline of supply of air to a turbokompressor, the elastic pipeline of system of ventilation of a case of the engine from a cover of a head of the block of cylinders and the pipeline of supply of air between the air filter and a radiator casing (the pipeline is put on on the union). |
| 4. To disconnect from a head of the block of cylinders all elastic pipelines of system of cooling. |
| 5. To disconnect the vacuum pipeline of the amplifier of brakes and the pipeline of return of oil from the vacuum pump. |
| 6. To disconnect electric wires from glow plugs, the sensor of pressure of oil, the sensor of temperature of cooling liquid and a thermoswitch of the fan of a radiator. |
| 7. To disconnect from nozzles pipelines of return of fuel. |
| 8. To disconnect injection pipelines from the fuel pump and nozzles. |
| 9. To disconnect a thermostat cover from a head of the block of cylinders. |
| 10. To disconnect топливопроводы from the pump and the fuel filter. |
| 11. To disconnect the vacuum pipeline from an inlet collector. |
| 12. To disconnect oil pipelines from a turbokompressor and the oil pump. |
| 13. To disconnect a turbokompressor from a final collector. |
| 14. To disconnect a bracket supporting a forward exhaust pipe from a cross-piece of a transmission. |
| 15. To disconnect a returnable oil pipeline from a turbokompressor and the block of cylinders of the engine. |
| 16. To remove maple driving belts of the pump of cooling liquid and the generator. |
| 17. To unscrew a fastening bolt on the left side of the bottom casing of a drive of system of a gazoraspredeleniye. |
| 18. To unscrew a bolt of fastening of the top casing of a drive of system of a gazoraspredeleniye on the right side in order that he could be taken. |
| 19. To remove three spring hooks of the top casing of a drive of system of a gazoraspredeleniye, to take bolts of fastening and to lower a casing down. |
| 20. To take from the block of cylinders, at height of a pulley of a cranked shaft, a stopper of a control opening of an opravka for installation of a cranked shaft. |
|
21. To turn a cranked shaft so that cut of a pulley of the fuel pump was in a position "12 hours". |
|
22. To establish in the block of cylinders an opravka (1) for installation of a cranked shaft in position VMT of the piston 1. cylinder. |
| 23. To rotate a cranked shaft counter-clockwise to its emphasis in an opravka. |
| 24. To remove a roller of the tension device of a gear belt of a drive of system of a gazoraspredeleniye, and then a gear belt. |
| 25. To lodge a passive pulley (increasing coverage of a gear belt) and a back casing of a drive of system of a gazoraspredeleniye. |
| 26. To unscrew nozzles. |
| 27. To uncover heads of the block of cylinders. |
| 28. To unscrew ten bolts of fastening of a head of the block of cylinders in sequence of return to their tightening
(to cм. fig. Sequence of a tightening of bolts of a head of the block of cylinders). |
| 29. To remove a head of the block of cylinders. |