Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   - 4.1. Petrol engines
      + 4.1.1. Technical characteristics
      4.1.2. Adjustment of gaps of valves
      + 4.1.3. Ignition system
      + 4.1.4. Fuel system
      - 4.1.5. The repair which is not demanding removal of the engine
         4.1.5.1. Removal and installation of a gear belt
         4.1.5.2. Removal of a head of the block of cylinders
         4.1.5.3. Dismantling and assembly of a head of the block of cylinders
         4.1.5.4. Installation of a head of the block of cylinders
      4.1.6. Removal and engine installation
      4.1.7. Engine dismantling
      4.1.8. Identification of cooperating parts
      4.1.9. Engine assembly
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. Gazoraspredeleniye system
      4.1.13. Greasing system
      + 4.1.14. Cooling system
      4.1.15. Suspension bracket of the power unit
      4.1.16. System of production of the fulfilled gases
   + 4.2. Diesel engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





4.1.5.2. Removal of a head of the block of cylinders

GENERAL INFORMATION

Knot of the air filter

1–case,

2–cover,

3–a filtering element,

4–the goffered hose of an air inlet,

5–air inlet of warm air

PERFORMANCE ORDER
1. To disconnect from the accumulator a weight wire.
2. To merge cooling liquid from cooling system (to unscrew a stopper on the right side of the block of cylinders and also to disconnect the bottom elastic pipeline from a radiator).
3. To remove the air filter, to disconnect the pipeline and draft from the carburetor and an inlet collector.
4. To disconnect electric wires from the carburetor and a head of the block of cylinders.
5. To disconnect from spark plugs of a wire of a high voltage and to remove the distributor of a high voltage.
6. To disconnect pipelines of cooling liquid from the chamber of the starting arrangement of the carburetor, the top hose from a radiator, and also a hose of a broad tank from a head of the block of cylinders.

Prevention

It is not necessary to have a head of the block of cylinders the bottom plane on a horizontal surface as it threatens with damage of valves acting below the plane. A head of the block of cylinders it is necessary to have so that plates of valves concerned nothing.