Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   - 4.1. Petrol engines
      + 4.1.1. Technical characteristics
      4.1.2. Adjustment of gaps of valves
      + 4.1.3. Ignition system
      + 4.1.4. Fuel system
      + 4.1.5. The repair which is not demanding removal of the engine
      4.1.6. Removal and engine installation
      4.1.7. Engine dismantling
      4.1.8. Identification of cooperating parts
      4.1.9. Engine assembly
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. Gazoraspredeleniye system
      4.1.13. Greasing system
      + 4.1.14. Cooling system
      4.1.15. Suspension bracket of the power unit
      4.1.16. System of production of the fulfilled gases
   + 4.2. Diesel engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






4.1.12. Gazoraspredeleniye system

SEALING RING OF THE CAM-SHAFT

Replacement

PERFORMANCE ORDER
1. To disconnect from the accumulator a wire of weight and to merge liquid from cooling system (see subsection 4.1.14.1).
2. To disconnect from a radiator the top and bottom elastic pipeline.
3. To remove a casing of a gear belt. To weaken bolts of fastening of the tension device, to move its roller, overcoming resistance of a spring, and to tighten bolts of fastening of the tension device (see fig. Bolts of fastening of a casing of a belt).
4. To remove a gear belt.
5. To remove from a cam-shaft a pulley and a basic plate of longitudinal installation.
6. To remove a sealing ring of a cam-shaft by means of the adaptation 21.008 A.
7. To oil a new sealing ring of a cam-shaft, to establish it in the adaptation 21.009 A and to press a ring into a head of the block of cylinders.
8. To establish on a cam-shaft a basic plate and a pulley.
9. To dress a gear belt, to establish on labels cranked and distributive shaft (see fig. Adjusting signs of system of a gazoraspredeleniye).
10. To pull a gear belt by means of the tension device (see fig. ONS engine knots).
11. To establish a casing of a gear belt.
12. To connect to a radiator elastic pipelines of system of cooling (top and bottom).
13. To fill system of cooling with liquid and to remove from it air.
14. To connect to the accumulator a weight wire.

CAM-SHAFT AND GAZORASPREDELENY'S INSTALLATION

Removal and installation

These actions are described in subsection 4.1.5.2.