Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   - 4.1. Petrol engines
      + 4.1.1. Technical characteristics
      4.1.2. Adjustment of gaps of valves
      + 4.1.3. Ignition system
      + 4.1.4. Fuel system
      - 4.1.5. The repair which is not demanding removal of the engine
         4.1.5.1. Removal and installation of a gear belt
         4.1.5.2. Removal of a head of the block of cylinders
         4.1.5.3. Dismantling and assembly of a head of the block of cylinders
         4.1.5.4. Installation of a head of the block of cylinders
      4.1.6. Removal and engine installation
      4.1.7. Engine dismantling
      4.1.8. Identification of cooperating parts
      4.1.9. Engine assembly
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. Gazoraspredeleniye system
      4.1.13. Greasing system
      + 4.1.14. Cooling system
      4.1.15. Suspension bracket of the power unit
      4.1.16. System of production of the fulfilled gases
   + 4.2. Diesel engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






4.1.5. The repair which is not demanding removal of the engine

GENERAL INFORMATION

ONS engine knots

1–final collector,
2–thermostat,
3–case of the thermostat,
4–gear pulley of a camshaft,
5–casing of a gear belt,
6–gear belt,
7–lever,
8–spring of the valve,
9–head of the block of cylinders,
10-piston,
11-block of cylinders of the engine,
12-the pump of cooling liquid,
13-distributor of ignition,
14-fuel pump,
15-maple belt,
16-Klinoremenny a pulley on cranked to a shaft,
17-a gear pulley on cranked to a shaft,
18-a gear pulley on intermediate to a shaft,
19-forward cover of a cranked shaft,
20-forward cover of an intermediate shaft,
21-persistent plate of an intermediate shaft,
22-intermediate shaft,
23-cranked shaft,
24-oil pump,
25-cover of a head of the block of cylinders,
26-camshaft,
27-persistent plate of a camshaft,
28-inlet collector,
29-сопун systems of ventilation of a case,
30-oil separator,
31-sensor of pressure of oil,
32-oil filter,
33-back epiploon of a cranked shaft,
34-persistent half ring of a cranked shaft,
35-oil case,
36-stopper oil plum