Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   - 4.1. Petrol engines
      + 4.1.1. Technical characteristics
      4.1.2. Adjustment of gaps of valves
      + 4.1.3. Ignition system
      + 4.1.4. Fuel system
      + 4.1.5. The repair which is not demanding removal of the engine
      4.1.6. Removal and engine installation
      4.1.7. Engine dismantling
      4.1.8. Identification of cooperating parts
      4.1.9. Engine assembly
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. Gazoraspredeleniye system
      4.1.13. Greasing system
      - 4.1.14. Cooling system
         4.1.14.1. Plums of liquid and filling of system of cooling
         4.1.14.2. Removal and radiator installation
         4.1.14.3. Removal and fan installation
         4.1.14.4. Pump of okhladzhayushchy liquid
         4.1.14.5. Thermostat replacement
      4.1.15. Suspension bracket of the power unit
      4.1.16. System of production of the fulfilled gases
   + 4.2. Diesel engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






4.1.14.2. Removal and radiator installation

GENERAL INFORMATION

Cooling system

 
1–radiator,
2–broad tank,
3–the pump of cooling liquid,
4–case of the thermostat,
5–thermostat,
6–elastic pipelines

Removal

PERFORMANCE ORDER
1. To disconnect from the accumulator a wire of weight and to merge cooling liquid from cooling system.
2. To disconnect the electric wires connecting system of cooling to the engine.
3. To disconnect the elastic pipeline from a broad tank.
4. In the cars equipped with an automatic transmission to disconnect elastic pipelines from a radiator of oil of an automatic transmission.
5. To remove an internal casing of a radiator.
6. To unscrew bolts of the top fastening a radiator.
7. To raise the car, to unscrew bolts of the bottom fastening of a radiator and to take it.

Installation

PERFORMANCE ORDER
1. For installation of a radiator it is necessary to execute actions in return sequence in relation to process of its removal.
2. After installation of pipelines of system of cooling it is necessary to fill system with cooling liquid and to remove from it air.
3. In the cars equipped with an automatic transmission, it is necessary to check in addition oil level in a transmission.