Ford Sierra

1982-1993 of release

Repair and car operation

Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   12.1. Technical characteristics
   12.2. Relay and safety locks
   12.3. Removal and generator installation
   12.4. Dismantling and generator assembly
   12.5. Adjustment of a tension of a maple belt
   12.6. Starter
   12.7. Windscreen screen wiper, knot of indexes and headlight
   12.8. Removal and installation of a combination of devices
   12.9. Adjustment of light of headlights
   + 12.10. Heating and ventilation system
   + 12.11. Electroschemes

Пассивный доход читать далее.
кнопка вызова официанта
Молдинг для мягкой мебели по материалам
На сайте где можно попрыгать на батуте в москве.
xiaomi чехол купить, nillkin.

12.8. Removal and installation of a combination of devices


Combination of devices


And – the main version, L and GL,
In – the Ghia version,
1–printed-circuit board,
6–the index of level of fuel and temperature of cooling liquid,


1. To disconnect a weight wire from the accumulator.
2. To remove top and bottom a casing of a steering column.
3. Carefully to pick up a small screw-driver and to remove the handle of adjustment of intensity of illumination of a combination of devices, and also a regulator of frequency of faltering work of a screen wiper and to remove the socket of multicontact connection.
4. To unscrew four screws of fastening of a casing of a combination of devices and to take a casing.
5. To unscrew four screws of fastening of a combination of devices and it is a little tax forward a combination of devices from the forward panel. bolts after removal of plastic casings (cтрелками are shown fastening screws).
6. To disconnect a cable of a drive of a speedometer, and also (on the right side) the multicontact socket of connection of electric wires.


For installation of a combination of devices it is necessary to execute actions in return sequence in relation to removal process.