Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
- 9. Suspension brackets
   - 9.1. Forward suspension bracket
      9.1.1. Technical characteristics
      9.1.2. Removal and installation of a rack of a forward suspension bracket
      9.1.3. Dismantling and assembly of a rack of a suspension bracket
      9.1.4. Removal and stabilizer installation
      9.1.5. Replacement of the metallo-rubber plug of the lever
      9.1.6. Removal and installation of a rotary fist
      9.1.7. Check of installation of forward wheels
      9.1.8. Replacement of bearings of a nave of a forward wheel
   + 9.2. Back suspension bracket
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





9.1.7. Check of installation of forward wheels

GENERAL INFORMATION

Convergence installation


PERFORMANCE ORDER
1. To check pressure in wheels and a condition of protectors of tires of all wheels.
2. To check a condition of disks of wheels.
3. To check, whether is not present люфта in sharnirny connections of elements of a suspension bracket and steering system.
4. To establish a steering wheel in situation for advance.
5. By means of the adaptation for measurement of installation of wheels to check values of characteristic corners of installation of forward wheels (see subsection 9.1.1)
6. In case of need to adjust a convergence of wheels by rotation of steering drafts. The maximum difference between length of both steering drafts (right and left) cannot exceed 5 mm.