Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
- 8. Steering
   8.1. Technical characteristics
   8.2. Removal and installation of steering transfer
   8.3. Dismantling and assembly of steering transfer
   8.4. Removal and installation of a steering column
   8.5. Dismantling and assembly of a steering wheel
   - 8.6. A steering with the hydraulic booster
      8.6.1. Technical characteristics
      8.6.2. Removal and installation of steering transfer
      8.6.3. Removal and installation of the hydraulic pump
      8.6.4. Dismantling and assembly of a steering CAM GEAR broadcast
      8.6.5. Dismantling and assembly of a steering ZF broadcast
      8.6.6. Removal and installation of a steering column
      8.6.7. Dismantling and assembly of a steering wheel
      8.6.8. Air removal from steering system
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






8.6.1. Technical characteristics

GENERAL INFORMATION

Transfer number:
  – Cam Gear broadcast
19,88
  – ZF broadcast
16,77
Number of turns of a steering wheel (from an emphasis against the stop):
  – Cam Gear broadcast
3,58
  – ZF broadcast
3,50
Diameter of a turn
10 m
Gap between a pusher and a cover of the case of a gear lath (Cam Gear broadcast)
0,025-0,125 mm
Thickness of laying of adjustment of a gap of reechny transfer
0,055-0,127 mm
Maple belts of a drive of the hydraulic amplifier
two with designation of 83 HF 6 B 30 IBA or 83 HF 8 A 615 AA
Tension
400-500 Nanometers (a new belt) or 300-400 Nanometers (belt which was in use).

Tightening moments

Fastening of steering transfer to a body cross-piece
The 1st stage – 15 Nanometers;
The 2nd stage – to tighten on 90 °
Spherical hinge of steering bent for to a rotary fist
25-30 Nanometers
Flange of the elastic hinge to a driving gear wheel of steering transfer
20-25 Nanometers
Cover of a driving gear wheel
17-24 Nanometers
Pusher cover to the case of steering transfer:
  – Cam Gear
22-24 Nanometers
  – ZF
7–8 Nanometers
Connections of hydraulic pipelines
20-27 Nanometers
The returnable pipeline to the pump
26-31 Nanometers
The forcing pipeline to the pump
16,4-20,5 Nanometers
Steering bent for to a gear lath
70-77 Nanometers
Lock-nut on steering draft
57-68 Nanometers
The case of a gear lath to the case of a driving gear wheel of a ZF broadcast
120-130 Nanometers
Flange of the krestovy hinge to a shaft of a steering wheel
20-25 Nanometers
Top holder of a steering column
45-55 Nanometers
Nut of a steering wheel
45-55 Nanometers
Wheel nut
100 Nanometers