Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
- 8. Steering
   8.1. Technical characteristics
   8.2. Removal and installation of steering transfer
   8.3. Dismantling and assembly of steering transfer
   8.4. Removal and installation of a steering column
   8.5. Dismantling and assembly of a steering wheel
   + 8.6. A steering with the hydraulic booster
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






8.2. Removal and installation of steering transfer

Removal

PERFORMANCE ORDER
1. To establish a steering wheel in situation for movement directly.
2. To unscrew a bolt of a tightening holder of a flange of the elastic hinge and to disconnect a shaft of a steering wheel from a driving gear wheel of steering transfer.
3. To lift the car and to remove forward wheels.
4. To take шплинты and to unscrew koronchaty nuts of spherical hinges of steering drafts.
5. To disconnect steering drafts from rotary fists of wheels by means of a stripper 13.006.
6. To unscrew two bolts (1) fastening of the case of steering transfer to a cross-piece of a body and to take steering transfer (2 – adjusting laying of a pusher).

Installation

PERFORMANCE ORDER
1. To establish a gear lath in situation for advance (a half of an angle of rotation of a gear lath of the transfer, necessary for lath moving from one extreme situation to another).
2. To connect a driving gear wheel of transfer to a flange of the elastic hinge of a shaft of a steering wheel, observing the correct installation of both connected elements.
3. To establish steering transfer on the corresponding place and to tighten two bolts of fastening of the case of steering transfer to a body cross-piece.
4. To fix spherical hinges of both steering bent for to rotary fists of wheels.
5. To tighten all carving connections by the corresponding moments.
6. To establish both lobbies of a wheel and to lower the car.
7. To check and in case of need to adjust a disorder / convergence of wheels (see the corresponding description in subsection 9.1.1).