Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
- 7. Driveshaft and back bridge
   7.1. Technical characteristics
   7.2. Removal and driveshaft installation
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assembly of the back bridge
   7.6. Dismantling and differential assembly
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assembly and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
   + 7.11. Semi-axes
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





7.4. Removal and installation of the back bridge

GENERAL INFORMATION

Zadny Bridge

And – the remote plug,

In – laying,

With – a flange of adjustment of a gap of the main transfer

Zadny Bridge

1–case,
2–bearings of differential,
3–leading gear wheel of the main transfer,
4–a conducted gear wheel of the main transfer,
5–cover of a case of the back bridge,
6–box of differential,
7–semi-axial gear wheels,
8–саттелиты,
9–type-setting laying,
10-nut of the bearing of a leading gear wheel,
11-a flange of a leading gear wheel for connection with the back hinge of the driveshaft,
12-nut of a flange,
13-sealing ring,
14-blocking flange,
15-holder of the bearing,
16-compensatory washer

Removal

PERFORMANCE ORDER
1. To lift the car.
2. To remove back wheels.
3. To remove brake drums.
4. To remove naves of wheels and a semi-axis (see the corresponding description in subsection 7.11.1).
5. To remove bearing brake boards.
6. To remove the driveshaft (see subsection 7.2).
7. To prop up the back bridge by means of a jack.
8. To disconnect an element of back fastening of the bridge to a body.
9. To disconnect elements of forward fastening of the bridge to a beam of a back axis (1 – bolts of a flange of the hinge, 2 – bolts of fastening of a katrer of the back bridge).
10. To take the back bridge.

Installation

PERFORMANCE ORDER

To execute actions in return sequence in relation to removal process. After installation it is necessary to check oil level in a case of the back bridge.