Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
- 7. Driveshaft and back bridge
   7.1. Technical characteristics
   7.2. Removal and driveshaft installation
   7.3. Repair of the intermediate bearing
   7.4. Removal and installation of the back bridge
   7.5. Dismantling and assembly of the back bridge
   7.6. Dismantling and differential assembly
   7.7. Adjustment of bearings of gear wheels of the main transfer
   7.8. Adjustment of gear wheels of the main transfer
   7.9. Assembly and adjustment of the main transfer
   7.10. Replacement of a sealing ring of a gear wheel of the main transfer
   - 7.11. Semi-axes
      7.11.1. Removal and installation
      7.11.2. Dismantling and assembly
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






7.11. Semi-axes

7.11.1. Removal and installation

Removal

PERFORMANCE ORDER
1. To lift the car and to remove a back wheel from the relevant party.
2. To remove a brake drum.
3. To unscrew a nut of fastening and to remove a nave flange by means of the corresponding stripper.
4. To unscrew nuts of fastening of a nave of a wheel to the lever of a back suspension bracket.
5. To remove a nave of a wheel and to disconnect bearing brake board.
6. To attach bearing brake board two bolts to the lever of a back suspension bracket.
7. To take a semi-axis.

Prevention

Three-humeral hinges of a semi-axis cannot be turned one concerning another on a corner more than 13 ° as it breaks their working capacity.


Installation

PERFORMANCE ORDER
1. To insert the semi-axis end into a shlitsevy opening of a box of differential.
2. To attach a nave of a wheel and bearing brake board to the lever of a back suspension bracket.
3. To insert four bolts of fastening, a casing of the hinge and new collars of fastening of a casing.
4. To establish a flange of a nave of a wheel and to screw up a nut of fastening of a nave without a final tightening.
5. To establish a brake drum and a back wheel.
6. To lower the car and to tighten the corresponding moments a nut of a nave of a back wheel, and also a nut of bolts of fastening of a wheel.