Ford Sierra

1982-1993 of release

Repair and car operation


Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   + 4.1. Petrol engines
   - 4.2. Diesel engine
      + 4.2.1. Technical characteristics
      4.2.2. Check and adjustment of gaps of valves
      + 4.2.3. Fuel system
      + 4.2.4. Nozzles
      4.2.5. Glow plugs
      4.2.6. Compression check
      4.2.7. Air removal from fuel system
      4.2.8. Fuel filter
      4.2.9. Fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of number of turns of idling
      - 4.2.11. The repair which is not demanding removal of the engine
         + 4.2.11.1. Head of the block of cylinders
         4.2.11.2. Removal and engine installation
         - 4.2.11.3. Dismantling, repair and engine assembly
            4.2.11.3.1. Installation of the back radical bearing
            4.2.11.3.2. Knot assembly piston rod
            4.2.11.3.3. Assembly of a drive of system of a gazoraspredeleniye
            4.2.11.3.4. Further assembly of the engine
         + 4.2.11.4. Greasing system
         + 4.2.11.5. Cooling system
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






4.2.11.3.3. Assembly of a drive of system of a gazoraspredeleniye
GENERAL INFORMATION

Gazoraspredeleniye system
1–casing of a driving chain of system of a gazoraspredeleniye,
2–laying of a casing,
3–intermediate plate,
4–laying of a plate,
5–asterisk of a cam-shaft,
6–chain of system of a gazoraspredeleniye,
7–asterisk of the tension device of a chain,
8–ball bearing,
9–clown,
10-plug,
11-toddler,
12-axis of levers of valves,
13-holder of an axis of levers of valves,
14-lever of the valve,
15-holder of blocking of an axis of levers of valves, 		16-adjusting spring of an axis of levers of valves,
17-flat washers,
18-pusher,
19-core of a pusher,
20-final valve,
21-inlet valve,
22-crackers of fastening of a basic plate of a spring of the valve,
23-top basic plate of a spring valve,
24-spring of the valve,
25-bottom basic plate of a spring valve,
26-sealant of a core of the valve

PERFORMANCE ORDER
1. To establish (the party with an adjusting sign (1) outside) a chain asterisk together with a shponka on a cranked shaft.
2. To establish a flange of the holder of an asterisk of a drive of the fuel pump together with the pipeline of supply of oil.
3. To establish the tension device of a driving chain of system of a gazoraspredeleniye.
4. To establish an asterisk of a drive of the fuel pump and to turn a cranked shaft so that the piston in the 1st cylinder was in VMT.

5. To establish a driving chain of system of a gazoraspredeleniye so that its designations of red color coincided with signs on asterisks of a cam-shaft and the fuel pump, and designation of white color – with signs on an asterisk of a cranked shaft.
6. To establish an asterisk of the tension device of a chain together with the clown and to pull a chain so that to receive a gap of 0,5-1 mm between a cheek of the tension device and its holder. To tighten a roller of the tension device.
7. To replace a sealing ring of a casing of a driving chain of system of a gazoraspredeleniye and to screw a casing.