Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   + 4.1. Petrol engines
   - 4.2. Diesel engine
      + 4.2.1. Technical characteristics
      4.2.2. Check and adjustment of gaps of valves
      + 4.2.3. Fuel system
      + 4.2.4. Nozzles
      4.2.5. Glow plugs
      4.2.6. Compression check
      4.2.7. Air removal from fuel system
      4.2.8. Fuel filter
      4.2.9. Fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of number of turns of idling
      - 4.2.11. The repair which is not demanding removal of the engine
         + 4.2.11.1. Head of the block of cylinders
         4.2.11.2. Removal and engine installation
         + 4.2.11.3. Dismantling, repair and engine assembly
         + 4.2.11.4. Greasing system
         - 4.2.11.5. Cooling system
            4.2.11.5.1. Liquid plums from cooling system
            4.2.11.5.2. Filling of system and air removal
            4.2.11.5.3. Fan
            4.2.11.5.4. Thermostat
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





4.2.11.5. Cooling system

4.2.11.5.1. Liquid plums from cooling system

GENERAL INFORMATION

Cooling system

1–the pump of cooling liquid,
2–casing of a radiator,
3–thermostat,
4–cover of the thermostat,
5–the sensor of temperature of cooling liquid,
6–a pulley of a drive of the pump of cooling liquid,
7–maple belt,
8–roller of the tension device of a maple belt,
9–pulley of a cranked shaft,
10-maple belts of a drive of the fan and generator,

13-fan,
14-axis of the fan,
15-pulley of the generator,
16-brush,
17-radiator,
18-the sensor of temperature of cooling liquid,
19-broad tank,
20-the sensor of level of cooling liquid

Liquid plums from cooling system

PERFORMANCE ORDER
1. To unscrew a stopper of filling of liquid in a broad tank.
2. To establish a control lever of temperature of system of heating of salon on the maximum temperature.
3. To unscrew a stopper plum of cooling liquid on a radiator (it is specified by an arrow).
4. To unscrew a stopper plum of cooling liquid on the right side in a back part of the block of cylinders of the engine (it is specified by an arrow).
5. Under these jams it is necessary to substitute the corresponding capacities and to wait cooling liquid will not flow down yet.