Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   + 4.1. Petrol engines
   - 4.2. Diesel engine
      + 4.2.1. Technical characteristics
      4.2.2. Check and adjustment of gaps of valves
      + 4.2.3. Fuel system
      + 4.2.4. Nozzles
      4.2.5. Glow plugs
      4.2.6. Compression check
      4.2.7. Air removal from fuel system
      4.2.8. Fuel filter
      4.2.9. Fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of number of turns of idling
      - 4.2.11. The repair which is not demanding removal of the engine
         + 4.2.11.1. Head of the block of cylinders
         4.2.11.2. Removal and engine installation
         + 4.2.11.3. Dismantling, repair and engine assembly
         + 4.2.11.4. Greasing system
         + 4.2.11.5. Cooling system
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






4.2.11.2. Removal and engine installation

GENERAL INFORMATION

Holders of an engine mount

1–right holder,

2–left holder,

3–right metallo-rubber connector,

4–left metallo-rubber connector,

5–engine mount cross-piece

Removal

PERFORMANCE ORDER
1. To disconnect and remove the accumulator. To remove a cowl.
2. To remove the air filter and to muffle an entrance air opening of an inlet collector.
3. To merge cooling liquid from cooling system (see subsection 4.2.11.5.1) and to remove a radiator together with the holder.
4. To disconnect pipelines of a heater of salon of the car.
5. To disconnect fuel hoses.
6. To disconnect electric wires from the engine.
7. To disconnect a forward exhaust pipe from a final collector.
8. To remove the auxiliary pump of system of a steering, without disconnecting from it pipelines, and to suspend it to a wing.
9. To disconnect a cable of a pedal of an accelerator from the fuel pump.
10. To remove a starter.
11. To unscrew bolts of fastening of holders of a suspension bracket from the engine and to prop up gazoraspredeleniye system under a coupling case.
12. To unscrew the bolts connecting the engine to a transmission.
13. To hook on a cable for brackets for lifting in front of and behind a head of the block of cylinders.
14. By means of the lift to move the engine forward and to disconnect it from a transmission, and then to lift the engine up and to take it from a motor compartment of the car.

Installation

PERFORMANCE ORDER
1. To establish the engine in a motor compartment and to check, whether correctly it is established concerning a transmission.
2. To tighten the bolts connecting the engine to a transmission, and then bolts of holders of an engine mount.
3. To connect hoses of system of cooling and to fill it with the corresponding liquid.
4. To connect a cable of a pedal of an accelerator to the fuel pump and to adjust its tension.
5. To connect fuel hoses and to remove air from fuel system.
6. To establish and connect the accumulator; to establish the air filter and a cowl.
7. To start the engine and to check its work.