Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
- 1.2. Car identification
   1.3. Car lifting
   1.4. Towage
   1.5. Combination of devices
   1.6. Cowl
   1.7. Engine start
   1.8. Lighting and alarm system
   1.9. Replacement of bulbs
   1.10. Ventilation and salon heating
   1.11. Doors
   1.12. The hatch and a luggage carrier on a roof
   1.13. Seats and head restraints
   1.14. Mirrors
   1.15. Control bulb of a pristegivaniye of seat belts
   1.16. Wheel replacement
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






1.9. Replacement of bulbs

GENERAL INFORMATION

Bulbs of near and far light

Bulbs of near and far light, and also marker lights are available from a motor compartment.

PERFORMANCE ORDER
1. To remove a casing from a back part of a headlight, turning it counter-clockwise.
2. To disconnect the socket of electric wires (In).
3. To remove a spring of fastening of a bulb (And).
4. To turn the holder of a bulb counter-clockwise and to take it from a headlight.
5. To replace a bulb.
6. To insert the holder of a bulb into a nest of a headlight and to fix it turn against the stop to the right.
7. To establish a spring of fastening and the socket of wires.
8. To check correctness of functioning of a bulb.
9. To fix a casing on a back part of a headlight.

Prevention

It is impossible to touch fingers a glass part of bulbs, in particular the halogen. Otherwise before bulb installation in a nest it should be washed out spirit solution.


Marker lights

PERFORMANCE ORDER
1. To remove a casing from a back part of a headlight.
2. To take the holder of a bulb (under the holder of a bulb of near and far light).
3. To replace a bulb.
4. To insert the holder into a nest.
5. To be convinced that the boss of a bulb is well fixed.
6. To check installation and bulb functioning.
7. To fix a casing on a back part of a headlight.

Bulbs of headlights of a driving beam

Some versions of cars are equipped with headlights of a driving beam with halogen bulbs.

PERFORMANCE ORDER
1. To remove a bracket (And) fastenings of a cover and to uncover headlights.
2. To compress a spring (In) fastenings of a bulb and to remove it. To take a bulb (C).
3. To disconnect the socket of wires.
4. To connect a new bulb to the socket of electric wires and to insert it into a headlight.
5. To establish a spring of fastening of a bulb.
6. To establish a cover and a fastening bracket.

Forward indexes of turns

PERFORMANCE ORDER
1. From the back party of a bumper to remove outside a fastening clip.
2. To get from a bumper a bulb of the forward index of turn forward; in the Ghia version the bulb of the forward index of turn adheres the lever located under the top fastening of a bumper which should be removed outside for bulb extraction.
3. To turn the holder of a bulb of the forward index of turn to the left and to take it.
4. To press a bulb, to turn it to the left and to take.
5. To establish in the holder a new bulb, turning it to the right, and then to fix the turn index, carrying out the above described actions in return sequence.

Back lamp

Bulbs of a back lamp are located in the knot of the holder available from within of a luggage carrier.

PERFORMANCE ORDER
CARS WITH THE TYPE BODY BERLIN AND THE SEDAN
1. To take knot of the holder, moving a fastening stopper located on the end of this knot.
2. In each knot of the holder four bulbs are located: bulb of a signal of braking (1), bulb of a backing (2), bulb of a marker light and back antifog lamp (3) and bulb of the back index of turn (4).
3. To press a bulb which should be replaced, turn it and take from knot of the holder.
4. To establish a new bulb in knot of the holder, to turn it, and then to press knot of the holder before blocking of a stopper of fastening.
CARS WITH THE BODY SUCH AS КОМБИ
1. Having opened a luggage carrier by means of a screw-driver to turn a stopper of fastening and to remove a casing of a back lamp.
2. To remove plates of fastening of knot of the holder (And) and to take it. In each knot of the holder five bulbs are located: bulb of a backing (1), bulb of marker back light (2), bulb of the back index of turn (3), bulb of a back antifog lamp (4), bulb of the alarm system of braking (5).
3. To press a bulb which should be replaced, turn it and take from knot of the holder.
4. To establish a new bulb in knot of the holder, to turn it, and then to fix knot of the holder.

Illumination of registration plate

PERFORMANCE ORDER
1. By means of a thin screw-driver carefully to take knot of a lamp of illumination of registration plate from a nest in a rear bumper.
2. To turn to the left and to take the holder of a bulb.
3. To replace a bulb which is pressed in the holder.
4. To establish the holder and to fix knot of a lamp of illumination of registration plate in a rear bumper.

Illumination of a luggage carrier

Such as a berlin and the Sedan is present at some versions of equipment of a body a bulb of illumination of a luggage carrier.

PERFORMANCE ORDER
1. By means of a screw-driver carefully to remove a bulb plafond.
2. Turning a cartridge counter-clockwise to take it from a lamp plafond, and then to get from it a bulb.

Lamps of illumination of salon

PERFORMANCE ORDER
1. Having established the switch in average situation (the lamp is switched off).
2. By means of a screw-driver it is necessary to get a cartridge of a bulb, and then to take a bulb.