Sitting lobbies
Adjustment of forward sitting
|
1–lever of longitudinal adjustment
|
2–handle of adjustment of an inclination of a back |
LONGITUDINAL ADJUSTMENT
| PERFORMANCE ORDER |
|
|
1. To extend the lever (1) longitudinal adjustment located under sitting from an axis of symmetry of the car and to hold it in this situation. In some versions of equipment of cars there is a possibility of regulation of height of sitting of the driver handle (3) turn in the lower part of sitting from doors. For lifting of sitting it is necessary to turn the handle counter-clockwise, and for lowering – clockwise. |
| 2. To move sitting before the chosen situation is longitudinal and to release the lever of longitudinal adjustment. |
| 3. To move sitting it is a little forward and back before blocking of forward sitting. |
|
ADJUSTMENT OF THE INCLINATION OF THE BACK OF THE SEAT
|
|
The tilt angle of a back of sitting can be changed turn of the handle (2) located in the bottom of a back from doors. |
ADJUSTMENT OF THE BEND OF THE SUPPORT OF THE WAIST
|
|
In some versions of equipment of cars adjustment of a bend of a support of a waist by turn of the handle (4) located on inside of a support is possible. |
Back sitting
FOLDING OF A BACK BY NERAZDELYAEMA
| PERFORMANCE ORDER |
|
|
1. To lift two buttons located on each side of a back. |
| 2. To incline a back forward. |
|
FOLDING OF THE DIVIDED BACK
| PERFORMANCE ORDER |
| Cars with a berlin body |
|
|
1. To lift the button being behind that part of a back which should be combined. |
| |
2. To combine the unblocked part of a back forward. |
| Cars with a body the Sedan |
| 1. To open a luggage carrier. |
|
2. To pull for the button of an unblocking of cоответствующей of a part of a back (the rychazhok of an unblocking is available from within a luggage carrier.). |
| 3. To combine the corresponding part of a back forward. |
|
FOLDING OF BACK SITTING
| PERFORMANCE ORDER |
| To pull for a tape being in a back part of sitting, to raise and turn sitting forward. |
|
Folding of the back shelf
| PERFORMANCE ORDER |
| 1. For extraction of the back shelf (only two volume bodies) it is necessary to unhook drafts from hooks in a back door. |
| 2. To take from directing to an axis of turn of the shelf. |
|
Head restraints
For change of height of a head restraint it is necessary to move it in the corresponding direction.
|
|
Extraction of a head restraint demands pressing of the button being about the right directing. |
|