Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
- 9. Suspension brackets
   + 9.1. Forward suspension bracket
   - 9.2. Back suspension bracket
      9.2.1. Technical characteristics
      9.2.2. Shock-absorber replacement
      9.2.3. Replacement of a spring of a suspension bracket
      9.2.4. Removal and installation of the lever of a suspension bracket
      9.2.5. Replacement of the metallo-rubber plug of a beam of a suspension bracket
      9.2.6. Replacement of bearings of a nave of a back wheel
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment





9.2.5. Replacement of the metallo-rubber plug of a beam of a suspension bracket

GENERAL INFORMATION

Fastening of the metallo-rubber plug of a beam of a back axis

1–bolts of fastening,

2–clamps

PERFORMANCE ORDER
1. To lift and fix a back part of the car.
2. To unscrew 3 bolts of fastening to a body of a metal plate of the metallo-rubber plug of a beam of a back axis.
3. By means of the corresponding lever leaning about the lever of a suspension bracket, and by means of the adaptation 15.014 to take the metallo-rubber plug from a nest of a beam of a back axis.
4. To grease the new metallo-rubber plug with glycerin or equivalent lubricant means.
5. By means of the adaptation 15.017 to establish the metallo-rubber plug together with laying and a nut in a nest of a beam of a back axis.
6. To remove the adaptation and to take the lever.
7. To establish a metal plate on the plug and to screw three bolts of fastening of the metallo-rubber plug on a beam of a back axis (one bolt with fixing) and to a body (two bolts).