1982-1993 of release
Repair and car operation
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
- 5. Coupling
5.1. Technical characteristics
5.2. Removal and coupling installation
5.3. Replacement of the needle bearing
5.4. Replacement of a cable of coupling
5.5. Mechanism of a pedal of coupling
5.6. Replacement of a pedal of coupling
5.7. Vyzhimna coupling bearing
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
Ф the iksator of the automatic mechanism can be blocked on gear sector of a pedal of coupling, especially, in the presence of considerable wear. In this case, there will be no free wheeling of a cable that will lead to pro-slipping of coupling and considerably will accelerate wear of slips.
For check of the mechanism it is necessary to open a cowl and sharply to extend a cable cover from a partition that will lead to a tension of a cable and a povorachivaniye of a gear segment. At normal operation of the mechanism clicks from a latch moving on a gear segment are audible, and at an otpuskaniye of a cover of a cable the mechanism occupies a starting position. In case of jamming of a latch to extend a cable cover from a partition it is impossible.
If there was a jamming, to remove a cable of coupling is problematic.
First option of removal of a cable: to make effort the switching-off lever for a cable detachment.
With the second – to cut a cable, however it is necessary to remember that the switching-off lever will come back at once back.
The cable pulling from a forward partition sometimes leads to jamming elimination, however it is desirable to replace the mechanism with the new in this case.