Ford Sierra

1982-1993 of release

Repair and car operation


Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
- 5. Coupling
   5.1. Technical characteristics
   5.2. Removal and coupling installation
   5.3. Replacement of the needle bearing
   5.4. Replacement of a cable of coupling
   5.5. Mechanism of a pedal of coupling
   5.6. Replacement of a pedal of coupling
   5.7. Vyzhimna coupling bearing
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


перейти на сайт ремонт газовых колонок.



5.2. Removal and coupling installation

Removal

PERFORMANCE ORDER
1. To remove a transmission.
2. To unscrew poreremenno crosswise bolts of fastening of a leading part of coupling to a flywheel, blocking a screw-driver a gear wreath of a flywheel.
3. To remove a leading part and a coupling disk.
4. To disconnect a returnable spring from forks of switching off of coupling.
5. To extend forks of switching off of coupling from their nest and to take them together with the vyzhimny bearing.
6. To separate vyzhimny the bearing and forks of switching off of coupling.

Installation

PERFORMANCE ORDER
1. To establish a coupling case on a transmission case, tightening bolts of its fastening the corresponding moment.
2. By means of the corresponding plug to establish on the press a new ring on vyzhimny the bearing.
3. To grease with graphite or molybdenic (MOS2) greasing a surface of sliding of the vyzhimny bearing and its plug directing.
4. To establish the bearing on the plug.
5. To press the end of forks into their nest so that the elastic terminations clasped a spherical pin.
6. To hook on a returnable spring on forks of switching off of coupling.
7. To be convinced that the elastic terminations of forks compress a spherical pin.
8. To establish a disk of coupling by the smooth party in the flywheel direction. To insert aligning core 21.044 into openings of a disk of coupling and a flywheel.
9. To establish a leading part of coupling and to tighten its bolts alternately crosswise the corresponding moment.