Ford Sierra

1982-1993 of release

Repair and car operation

Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
- 5. Coupling
   5.1. Technical characteristics
   5.2. Removal and coupling installation
   5.3. Replacement of the needle bearing
   5.4. Replacement of a cable of coupling
   5.5. Mechanism of a pedal of coupling
   5.6. Replacement of a pedal of coupling
   5.7. Vyzhimna coupling bearing
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

5.1. Technical characteristics

GENERAL INFORMATION

In cars with a mechanical transmission the one-disk dry coupling operated mechanically by means of a cable is used. The leading part of coupling has the central disk spring. The disk of coupling has a quencher of krutilny fluctuations with screw springs. Vyzhimna the bearing – ball. Adjustment of a free wheeling automatic also occurs by means of the ratchet mechanism located about a pedal of coupling.

Key parameters

Engine	1,3 and 1,6 ^dm3	2,0 ^dm3
Coupling brand	LUK or AP	Fichtel & Sachs, Laycock or LUK
Brand and type of slips	Mintex H 26/1 or Ferodo 1F 324
External diameter of slips (mm)	190	216
Internal diameter of slips (mm)	136	153
Thickness of slips (mm)	3,850 ± 1
Number of springs of a quencher of krutilny fluctuations of a disk of coupling	4	6

Tightening moments

Coupling case to the block of cylinders of the engine	40-51 Nanometers
Leading part of coupling to a flywheel	20-25 Nanometers
Flywheel to a cranked shaft of the engine	64-70 Nanometers