Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
- 11. Body
   11.1. Care of a body
   - 11.2. Body elements
      11.2.1. Cowl cable
      11.2.2. Cowl adjustments
      - 11.2.3. Doors
         11.2.3.1. Internal upholstery of a door
         11.2.3.2. Adjustment of closing of the lock of a door
         11.2.3.3. Internal door handle
         11.2.3.4. Cylinder of the lock of a door
         11.2.3.5. Door lock
         11.2.3.6. Forward sitting
+ 12. Electric equipment





11.2.3.4. Cylinder of the lock of a door

GENERAL INFORMATION

Fastening of the cylinder of the lock

1–cylinder of the lock,


2–fixing bracket


Removal

PERFORMANCE ORDER
1. To remove an internal upholstery of a door and condensing film over the lock cylinder.
2. To remove a fixing bracket, shifting it aside.
3. Partially to put forward from a door the lock cylinder, to turn up and to disconnect the plastic lever (2) (see fig. The mechanism of closing of a door) from draft of the cylinder of the lock.
4. Completely to get the lock cylinder.

Installation

Installation is made in sequence of return to removal. It is necessary to pay attention to the correct placement of consolidation, and a fixing bracket to establish under the first ledge of the cylinder of the lock.

As spare parts cylinders of locks with the plastic lever, but without the plug (3) (see fig. are delivered. Mechanism of closing of a door).

Before installation of the new cylinder of the lock it is necessary to insert the plug into the lever or on the cylinder to establish the old lever and to fix it a lock ring.