Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
- 10. Brake system
10.1. Technical characteristics
- 10.2. Forward brakes
10.2.1. Replacement of brake shoes
10.2.2. Support replacement
10.2.3. Replacement of a brake disk
10.2.4. Support repair
+ 10.3. Back brakes
10.4. Removal and installation of the main brake cylinder
10.5. Air removal from brake system
10.6. Adjustment of the hand brake
+ 11. Body
+ 12. Electric equipment
|
Prevention
Disks of both forward brakes should have identical thickness and the surface condition, only then both wheels will be braked at the same time. Therefore it is recommended to replace at the same time both disks.
Cнятие
| PERFORMANCE ORDER |
| 1. To remove brake shoes (see subsection 10.2.1). |
| 2. In cars with the engine 2,0 of dm3 to suspend a support to a body by means of a wire to protect a brake hose from damage. |
| 3. To unscrew the holder of a support from a rotary fist of a wheel. |
| 4. To unscrew the screw of fastening of a brake disk from a nave of a wheel and to remove a brake disk. |
|
Installation
| PERFORMANCE ORDER |
| 1. To establish a brake disk and to screw up the screw of its fastening to a wheel nave. |
| 2. To screw the holder of a support on a rotary fist of a wheel. |
| 3. To establish brake shoes (see subsection 10.2.1) and a support (see subsection 10.2.2). |
| 4. To establish wheels, to lower the car and to tighten nuts of fastening of wheels. |
| 5. Several times strongly to press a pedal of a brake to bring into contact brake shoes with a brake disk. |
|
|
|