Ford Sierra

1982-1993 of release

Repair and car operation

Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
- 10. Brake system
   10.1. Technical characteristics
   + 10.2. Forward brakes
   + 10.3. Back brakes
   10.4. Removal and installation of the main brake cylinder
   10.5. Air removal from brake system
   10.6. Adjustment of the hand brake
+ 11. Body
+ 12. Electric equipment

10.5. Air removal from brake system


Vessel placement for collecting brake liquid when pumping brakes


For air removal from brake system use of the device of the ARC 50 type is recommended.

1. To unscrew a stopper of a tank of brake liquid and to screw up on its place the device pipeline.
2. To connect the device ends to deaerator of brakes of all wheels.
3. To increase pressure in brake system and to remove air from hydraulic contours of lobbies and back brakes.
4. To check tightness of brake system.

In case of air removal from brake system without use of the special device it is necessary to remove air from forward brakes, and then from the back.