Ford Sierra

1982-1993 of release

GENERAL INFORMATION

Back suspension bracket

1–beam of a back axis,
2–slanting lever,
3–shock-absorber,
4–spring of a suspension bracket,
5–case of bearings of a nave of a wheel,

6–conic bearings,
7–sealing ring,
8–metallo-rubber plug of a beam,
9–metallo-rubber plug of the lever

PERFORMANCE ORDER

1. To unhook a fragment of a covering of a luggage carrier (a berlin body) or to incline forward a back of back sitting and to unscrew in front a covering of the bottom of a luggage carrier (a body комби) and also to remove a casing of the top fastening of the shock-absorber.
2. To lift and fix the car.
3. By means of the corresponding lift to prop up the lever through a wooden lining.
	4. To unscrew a bolt of the top fastening of the shock-absorber (in cars with a berlin body, on a photo) or to unscrew a nut of the top fastening of the shock-absorber, holding at the same time a shock-absorber rod with a key for internal shestigrannik (in cars with a body комби).
5. To unscrew a bolt of the bottom fastening of the shock-absorber (in cars with a berlin body) or to unscrew a nut of the bottom fastening of the shock-absorber (in cars with a body комби) and to take the shock-absorber down.
6. For installation of the shock-absorber to execute actions in return sequence in relation to removal process.