Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
- 3. General data
- 3.1. Cars with petrol engines
3.1.1. Masses and transfer numbers
3.1.2. Operational liquids
+ 3.1.3. Changes in a car design from 1984 to 1986.
- 3.1.4. Changes in a car design from 1987 to 1989.
3.1.4.1. OHC engine
- 3.1.4.2. Dm3 CVH 1,8 engine
- 3.1.4.2.1. Technical characteristics
3.1.4.2.1.1. Head of the block of cylinders of the engine
3.1.4.2.1.2. Block of cylinders of the engine
3.1.4.2.1.3. Krivoshipno-shatunny mechanism
3.1.4.2.1.4. Gazoraspredeleniye system
3.1.4.2.1.5. Greasing system
3.1.4.2.1.6. Cooling system
3.1.4.2.1.7. Fuel system
3.1.4.2.1.8. Ignition system
3.1.4.2.1.9. Tightening moments
3.1.4.2.2. Engine adjustment
3.1.4.2.3. Ignition system
3.1.4.2.4. Gazoraspredeleniye system
3.1.4.2.5. Assembly of the CVH 1,8 engine of dm3
+ 3.1.4.3. DOHC engine
+ 3.1.4.4. Service and repair
+ 3.1.4.5. Coupling
3.1.4.6. Mechanical five-speed transmission of type N
+ 3.1.4.7. Mechanical five-speed transmission of MT 75 type
3.1.4.8. Automatic transmission
3.1.4.9. Forward suspension bracket
+ 3.1.4.10. Brake system
+ 3.1.4.11. Electric equipment
3.1.4.12. General data
+ 3.1.5. Changes in a car design with 1990 till February, 1993.
+ 3.2. Cars with diesel engines
+ 4. Engines
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
|
The block of cylinders is cast from cast iron. Cylinders are executed directly in the block of cylinders of the engine.
Nominal diameters of cylinders
| The standard: |
| – group 1 |
79,940-79,950 mm
|
| – group 2 |
79,950-79,960 mm
|
| – group 3 |
79,960-79,970 mm
|
| – group 4 |
79,970-79,980 mm
|
| – group 5 |
79,980-79,990 mm
|
| – group 6 |
79,990-80,000 mm
|
| The increased: |
| – group A |
80,000-80,010 mm
|
| – group B |
80,010-80,020 mm
|
| – group C |
80,020-80,030 mm
|
Repair diameters of cylinders: are increased by 0,290 or 0,500 mm. |
|