Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   - 4.1. Petrol engines
      + 4.1.1. Technical characteristics
      4.1.2. Adjustment of gaps of valves
      + 4.1.3. Ignition system
      + 4.1.4. Fuel system
      + 4.1.5. The repair which is not demanding removal of the engine
      4.1.6. Removal and engine installation
      4.1.7. Engine dismantling
      4.1.8. Identification of cooperating parts
      4.1.9. Engine assembly
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. Gazoraspredeleniye system
      4.1.13. Greasing system
      + 4.1.14. Cooling system
      4.1.15. Suspension bracket of the power unit
      4.1.16. System of production of the fulfilled gases
   + 4.2. Diesel engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






4.1.8. Identification of cooperating parts

GENERAL INFORMATION

Identification of covers of radical and shatunny bearings

1-5-covers of radical bearings,

6–covers of shatunny bearings

Designation of the basis and rod cover is given in a circle.

Diameters of nests of radical bearings

The nominal sizes – without designations.

The repair sizes of +0,10 mm – designation by white paint on covers of radical bearings.

Radical necks

The nominal sizes – without designations.

The repair sizes of-0,25 mm – designation by green paint on a shoulder of the next knee, to a radical neck of the reduced diameter.

Shatunnye of a neck

The nominal sizes – without designations.
The repair sizes of-0,25 mm – the color sign executed on a shoulder of the next knee, to a radical neck of the reduced diameter.


Prevention

Cranked shaft in which both necks and loose leaves radical, and shatunny, have the reduced sizes, are designated by two color signs.


Shatunnye loose leaves

Loose leaves of the repair sizes are designated by Shatunnye on an external surface.