Ford Sierra

1982-1993 of release

Repair and car operation


Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
+ 4. Engines
- 5. Coupling
   5.1. Technical characteristics
   5.2. Removal and coupling installation
   5.3. Replacement of the needle bearing
   5.4. Replacement of a cable of coupling
   5.5. Mechanism of a pedal of coupling
   5.6. Replacement of a pedal of coupling
   5.7. Vyzhimna coupling bearing
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment






5.4. Replacement of a cable of coupling

Removal

PERFORMANCE ORDER
1. To establish the car over a viewing hole or to lift it on the lift.
2. To remove a casing of forks of switching off of coupling from a coupling case after removal of a spring hook.
3. To remove a ratchet stopper from gear sector, having enclosed the corresponding wooden whetstone under a coupling pedal.
4. To disconnect the cable end from forks of switching off of coupling, moving its end down, and then forward.
5. To remove the left part of an upholstery about pedals.
6. To unhook a cable from a pedal with gear sector and to move it through an opening between a pedal and gear sector.
7. To extend a cable through an opening of a forward partition in a motor compartment.

Installation

PERFORMANCE ORDER
1. To insert a cable through an opening in a forward partition from a motor compartment, to lead it between a pedal of coupling and gear sector and to hook on its end on this sector.
2. To pull a cable forward to extend it from a cover and to hook on its other end on forks of switching off of coupling.
3. To fix a rubber casing together with a spring hook on a coupling case.
4. To take wooden whetstone from under a coupling pedal.
5. To establish into place earlier removed upholstery about pedals.
6. To lower the car.