Ford Sierra

1982-1993 of release

Repair and car operation



Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   + 4.1. Petrol engines
   - 4.2. Diesel engine
      - 4.2.1. Technical characteristics
         4.2.1.1. Block of cylinders
         4.2.1.2. Krivoshipno-shatunny mechanism
         4.2.1.3. Greasing system
         4.2.1.4. Fuel system
         4.2.1.5. Tightening moments
      4.2.2. Check and adjustment of gaps of valves
      + 4.2.3. Fuel system
      + 4.2.4. Nozzles
      4.2.5. Glow plugs
      4.2.6. Compression check
      4.2.7. Air removal from fuel system
      4.2.8. Fuel filter
      4.2.9. Fuel pump, installation of the beginning of injection of fuel
      4.2.10. Adjustment of number of turns of idling
      + 4.2.11. The repair which is not demanding removal of the engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


мебельный щит ясень цельноламельный




4.2.1.1. Block of cylinders

GENERAL INFORMATION

The pig-iron block of cylinders has the cylinders executed directly in its material. Has five nests of radical bearings of a cranked shaft and three nests of bearings of a cam-shaft.

Diameter of cylinders:
  – the nominal:
  • group A
94,000-94,015 mm
  • group B
94,015-94,030 mm
  – 1st repair size:
  • group C
94,200-94,215 mm;
  • group D
94,215-94.230 mm
  – 2nd repair size:
  • group E
94,400-94,415 mm
  • group F
94,415-94,430 mm
  – 3rd repair size:
  • group G
94,600-94,615 mm
  • group H
94,615-94,630 mm
Diameters of openings of nests of directing pushers of valves:
  – nominal size
24,00-24,03 mm
  – repair size
24,20-24,23 mm