Ford Sierra

1982-1993 of release

Repair and car operation

Ford Siyerra
+ 1.2. Car identification
+ 2. Maintenance
+ 3. General data
- 4. Engines
   - 4.1. Petrol engines
      - 4.1.1. Technical characteristics
         4.1.1.1. Head of the block of cylinders
         4.1.1.2. Block of cylinders of the engine
         4.1.1.3. Krivoshipno-shatunny mechanism
         4.1.1.4. Gazoraspredeleniye system
         4.1.1.5. Greasing system
         4.1.1.6. Cooling system
         4.1.1.7. Fuel system
         4.1.1.8. Ignition system
         4.1.1.9. Tightening moments
      4.1.2. Adjustment of gaps of valves
      + 4.1.3. Ignition system
      + 4.1.4. Fuel system
      + 4.1.5. The repair which is not demanding removal of the engine
      4.1.6. Removal and engine installation
      4.1.7. Engine dismantling
      4.1.8. Identification of cooperating parts
      4.1.9. Engine assembly
      4.1.10. Replacement of pistons
      4.1.11. Removal and installation of an intermediate shaft
      4.1.12. Gazoraspredeleniye system
      4.1.13. Greasing system
      + 4.1.14. Cooling system
      4.1.15. Suspension bracket of the power unit
      4.1.16. System of production of the fulfilled gases
   + 4.2. Diesel engine
+ 5. Coupling
+ 6. Transmissions
+ 7. Driveshaft and back bridge
+ 8. Steering
+ 9. Suspension brackets
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

4.1.1.8. Ignition system

GENERAL INFORMATION

The ignition system storage, transistor includes:

  – the ignition distributor with the contactless sensor with the Hall converter;
  – ignition coil;
  – switchboard;
  – spark plugs.

Distributor of ignition of BOSCH

Characteristics of an advancing of ignition of the distributor of ignition of BOSCH of the engine 1,3 д ^dm3

And – a centrifugal regulator,

In – a vacuum regulator

Prevention

During check at the stand (the distributor of ignition is removed) values of number of turns of the engine are necessary for reducing by a half. During check of the distributor established in the car, to size of an advancing of ignition it is necessary to add size of an initial corner of an advancing of ignition.

Characteristics of an advancing of ignition of the distributor of ignition of BOSCH of the engine 1,6 д ^dm3

And – a centrifugal regulator,

In – a vacuum regulator

Prevention

Characteristics of an advancing of ignition of the distributor of ignition of BOSCH of the engine 2,0 ^{of dm3}

And – a centrifugal regulator,

In – a vacuum regulator

Prevention

Ignition order (the cylinder No. 1 from a cam-shaft)	1–3–4–2
Direction of rotation of a shaft: clockwise
Type:
– ^dm3 engine 1,3	0 237 002 075
– ^dm3 engine 1,6	0 237 002 076
– ^dm3 engine 2,0	0 237 002 078
Corner of an advancing of ignition:
– ^dm3 engine 1,3	12 ° before VMT
– ^dm3 engine 1,6:
• LCT type	12 ° before VMT
• LCS type (economic)	10 ° before VMT
– ^dm3 engine 2,0	8 ° before VMT

Switchboard

Brand and type: Ford 83 BB 12 A 297 AA.

Distributor of ignition of LUCAS

Characteristics of an advancing of ignition of the distributor of ignition of BOSCH of the engine 2,0 ^{of dm3}

	And – a centrifugal regulator, In – a vacuum regulator
Direction of rotation of a shaft: clockwise.

Prevention

Ignition order (the cylinder No. 1 from a cam-shaft)	1–3–4–2
Type	61 DH 4
Corner of an advancing of ignition	10 ° before VMT

Ignition coil

Brand and type	Bosch 0 221 122 031, Femsa, Polmot or Lucas 32C5
Resistance of primary winding	0,72-0,88 Ohm
Resistance of a secondary winding	4,5-7 kiloohms

Spark plugs

Brand and type	Motorcraft BRF 22C or Motorcraft BF 22C
Gap between electrodes	0,75 mm